大型多线切断机-大发888娱乐场手机版
大型多线切断机

大型多线切断机-大发888娱乐场手机版

大型多线切断机
本机采用金刚砂线锯技术,用于切割单晶硅棒、多晶硅方棒。在2米的长度范围内可一次切割最多7个锯口,锯口刀缝小,平行度好,加工效率高,是硅棒加工高效新型机器。 The cutter is used to cutting mono-crystal silicon rod and poly-silicon cube with the technology of monocrystalline wire saw. It could cut seven kerfs at most in the length of two meters in one running distance.
主要参数 Process power
1.加工规格: 单晶棒直径Φ155~230mm
长度2000mm
Product type:

mono-crystal silicon Φ155-230mm,length 2000mm,

poly-silicon cubic rod 230×230×260mm(height)seven slices

emery wire: Φ0.25-0.35mm

running rate: 0-3.5mm/min

emery wire loss: ≤1%Power: less than 20KW

size: 3540(length)×3200(width)×2000mm(height)

Weight: about 6.5TMain parameter

多晶方棒230×230mm(方)
×260(长)7根
2.金刚砂线规格: Φ0.25~0.35mm3.
切割进给速度:0~3.5mm/min
2.金刚砂线规格: 回线率≥99%
2.金刚砂线规格: 小于20KW
2.金刚砂线规格: 3540×3200×2000mm
(长、宽、高)
2.金刚砂线规格: 约6.5T
返回